ThinkRF Support

The product from ThinkRF is warrantied for one year. Full details can be found in the ThinkRF Warranty Terms document attached.

Please contact your regional reseller or sales@thinkrf.com for extend warranty information.

ThinkRF products are calibrated before leaving the factory.  ThinkRF suggests that the product be re-calibrated every 12 months, to ensure optimum performa...

ThinkRF uses a third party company “Pylon Electronics” to perform a NIST-traceable calibration verification and Pylon issues a calibration certificate as pa...

Streaming is the transfer of the captured data from the device. Once stream is started, it will continue to capture data until the stream is stopped.  All s...

Please contact sales@thinkrf.com for the most up to date lead time.

The recommended torque setting for all SMA connectors is 45 N.cm. An example of a torque wrench that can be used for this is Huber-Suhner P/N 74 Z-0-0-79. ...

ThinkRF uses 12V power supply made by XP power for all ThinkRF products, some products may require an additional connector.  If the user wish to replace th...