FAQs
When using the "Save Data" feature of the S240v5 (or formerly S240), actual spectrum data and its associated context information are saved into a ...
Tue, Feb 23, 2021 at 2:23 PM
The S240 software controls the ThinkRF R5500-408, 418, and 427 and can sweep from 9KHz to 8GHz, 18GHz, and 27GHz, respectively. At this time, it is not poss...
Fri, Jul 20, 2018 at 2:51 PM
The S240 software is included in the price of the ThinkRF RTSA products. You can also download the S240 software for free from the ThinkRF website to use wi...
Fri, Jul 20, 2018 at 2:55 PM
Yes, S240 RTSA software works on both R5500 and WSA5000.
Thu, Jul 19, 2018 at 10:59 AM
The spectrogram plot displays spectrum changes over time in a three-dimensional view. Frequency is displayed on the horizontal axis, and time on the ver...
Tue, Aug 14, 2018 at 4:42 PM
The persistence plot is a view of how long a signal remains present; as the signal grows weaker, the trace fades in color. Amplitude is displayed on the ver...
Tue, Aug 14, 2018 at 4:42 PM
Video Bandwidth (VBW) is basically a smoothing filter to reduce the variation in the noise as much as possible and allows measurement of low level signals. ...
Wed, Aug 15, 2018 at 11:14 AM
A lower RBW will increase the time needed to sweep, and increases the samplings collected.
Wed, Aug 15, 2018 at 11:04 AM
Zero Span mode can be done through our S240 software, there is a zero span option as shown below. By default, the signal display area plots the fre...
Wed, Aug 15, 2018 at 11:01 AM
ThinkRF S240 has Microsoft signed installer installed, however, Microsoft has added another layer of trust on top of the signed installer, so even though we...
Mon, Jun 3, 2019 at 3:30 PM